Service
CNC Press Brake Bending Services
Metal Lazer World provides CNC press brake bending using a 220-tonne press brake, with bending lengths up to 3,000 mm and confirmed material thicknesses up to 8 mm.
Confirmed Capability
Press Brake Capacity
| Process | CNC press brake bending |
|---|---|
| Press brake capacity | 220 tonnes |
| Maximum bending length | 3,000 mm |
| Maximum confirmed thickness | 8 mm |
| Confirmed materials accepted for review | Mild Steel (MS) and Stainless Steel |
Final bending capability depends on the material, material grade, bend length, bend angle, inside radius, flange dimensions, tooling, component geometry, and technical drawing review. The maximum 8 mm thickness does not apply equally to every material and bend configuration.
Technical Review
Every Bend Is Reviewed Before It Is Quoted
A 220-tonne CNC press brake, bending lengths up to 3,000 mm, and confirmed material thicknesses up to 8 mm.
Every bending requirement is reviewed according to the material, grade, thickness, bend length, bend angle, inside radius, flange dimensions, tooling requirements, and component geometry. Mild Steel and Stainless Steel are accepted for review.
Minimum flange dimensions, inside radii, bend angles, tooling, and bending tolerances are confirmed per project — they are not published as fixed values.
Prepare Your Enquiry
Information Required for Quotation
Include the following with your drawing so the requirement can be reviewed without delay:
- DXF drawing
- Material — Mild Steel (MS) and Stainless Steel
- Material grade
- Thickness
- Bend length
- Number of bends
- Bend angles
- Inside bend radius
- Flange dimensions
- Overall component dimensions
- Quantity
- Required completion date
- Inspection requirements
Send Your Bending Drawing for Review
Provide the bend lengths, angles, radii, and flange dimensions with your drawing for technical review and quotation.